Netbackup:Configuring Drive on RHEL(kernel 2.6)

Just see below action taken,im lazy to type more words today.

[root@Cel202 bin]# uptime
12:37:35 up 25 min, 1 user, load average: 0.03, 0.06, 0.05

[root@Cel202 ~]# lssg
sg0 0,0,0,0 HP Ultrium 2-SCSI K470
sg1 0,0,1,0 HP Ultrium 2-SCSI K470
sg2 0,0,2,0 HP Ultrium 4-SCSI H44S
sg3 0,0,3,0 HP Ultrium 4-SCSI H44S
sg4 1,0,0,0 HP Ultrium 2-SCSI K710
sg5 1,0,1,0 HP Ultrium 2-SCSI K710
sg6 2,0,0,0 HP Ultrium 3-SCSI L58S
sg7 2,0,1,0 HP Ultrium 3-SCSI L58S
sg8 3,0,0,0 HP Ultrium 3-SCSI L58S
sg9 3,0,1,0 HP Ultrium 3-SCSI L58S
[root@Cel202 ~]# cd /usr/openv/volmgr/bin/
[root@Cel202 bin]# ./tpautoconf -a
TPAC60 - - - -1~-1~-1~-1 2 - - - 0 - - - - - - - 0 0 - - cel202 4 - - 0 - - - -
TPAC60 ULTRIUM3_08 HP~~~~~~Ultrium~3-SCSI~~L58S /dev/nst9 -1~-1~-1~-1 1 0 0 8 8 3 - - - HU10648P9Y - 3 0 1 - - cel202 0 - - 0 - - - -
TPAC60 ULTRIUM3_07 HP~~~~~~Ultrium~3-SCSI~~L58S /dev/nst8 -1~-1~-1~-1 1 0 0 7 8 3 - - - HU10648P8R - 3 0 1 - - cel202 0 - - 0 - - - -
TPAC60 ULTRIUM3_06 HP~~~~~~Ultrium~3-SCSI~~L58S /dev/nst7 -1~-1~-1~-1 1 0 0 6 8 3 - - - HU10650UUE - 3 0 1 - - cel202 0 - - 0 - - - -
TPAC60 ULTRIUM3_05 HP~~~~~~Ultrium~3-SCSI~~L58S /dev/nst6 -1~-1~-1~-1 1 0 0 5 8 3 - - - HU10651AMG - 3 0 1 - - cel202 0 - - 0 - - - -
TPAC60 ULTRIUM2_04 HP~~~~~~Ultrium~2-SCSI~~K710 /dev/nst5 -1~-1~-1~-1 1 0 0 4 8 3 - - - MXP8A055CM - 3 0 1 - - cel202 0 - - 0 - - - -
TPAC60 ULTRIUM2_03 HP~~~~~~Ultrium~2-SCSI~~K710 /dev/nst4 -1~-1~-1~-1 1 0 0 3 8 3 - - - MXP8B02KAC - 3 0 1 - - cel202 0 - - 0 - - - -
TPAC60 HP.ULTRIUM4-SCSI.000 HP~~~~~~Ultrium~4-SCSI~~H44S /dev/nst3 -1~-1~-1~-1 1 0 - - 0 3 - - - HU18222726 - 5 0 0 cel8484 - cel202 0 - - 0 - - - -
TPAC60 HP.ULTRIUM4-SCSI.001 HP~~~~~~Ultrium~4-SCSI~~H44S /dev/nst2 -1~-1~-1~-1 1 0 - - 0 3 - - - HU181922Y3 - 5 0 0 cel8484 - cel202 0 - - 0 - - - -
TPAC60 ULTRIUM2_02 HP~~~~~~Ultrium~2-SCSI~~K470 /dev/nst1 -1~-1~-1~-1 1 0 0 2 8 3 - - - HUM4L00729 - 3 0 1 - - cel202 0 - - 0 - - - -
TPAC60 ULTRIUM2_01 HP~~~~~~Ultrium~2-SCSI~~K470 /dev/nst0 -1~-1~-1~-1 1 0 0 1 8 3 - - - HUM4M00002 - 3 0 1 - - cel202 0 - - 0 - - - -
[root@Cel202 bin]# ./tpconfig -d
Id DriveName Type Residence
Drive Path Status
****************************************************************************
0 ULTRIUM3_08 hcart TLD(0) DRIVE=8
/dev/nst9 UP
1 ULTRIUM3_07 hcart TLD(0) DRIVE=7
/dev/nst8 UP
2 ULTRIUM3_06 hcart TLD(0) DRIVE=6
/dev/nst7 UP
3 ULTRIUM3_05 hcart TLD(0) DRIVE=5
/dev/nst6 UP
4 ULTRIUM2_04 hcart TLD(0) DRIVE=4
/dev/nst5 UP
5 ULTRIUM2_03 hcart TLD(0) DRIVE=3
/dev/nst4 UP
8 ULTRIUM2_02 hcart TLD(0) DRIVE=2
/dev/nst1 UP
9 ULTRIUM2_01 hcart TLD(0) DRIVE=1
/dev/nst0 UP
[root@Cel202 bin]# cd /usr/openv/netbackup/bin/goodies/
[root@Cel202 goodies]# ./netbackup stop
stopping the NetBackup Service Monitor
stopping the NetBackup Service Layer
stopping the NetBackup compatibility daemon
stopping the Media Manager volume daemon
stopping the NetBackup Notification Service
[root@Cel202 goodies]# ./netbackup start
NetBackup Database Server started.
NetBackup Notification Service started.
NetBackup Enterprise Media Manager started.
NetBackup Resource Broker started.
Rebuilding device nodes.
Media Manager daemons started.
NetBackup request daemon started.
NetBackup compatibility daemon started.
NetBackup Job Manager started.
NetBackup Policy Execution Manager started.
NetBackup Service Layer started.
NetBackup is not configured for clustering.
NetBackup Service Monitor started.

0 comments: